The UCTv2+ adds a rear camera and up two composite A/V inputs to the factory 8.4” touch screen in compatible 2013+ Chrysler, Dodge & Jeep vehicles. 

The UCT v2 series interface adds 2 camera/video inputs to the factory 8.4” touch screen in compatible
2013+ Dodge and Jeep vehicles, with additional expansion options for future upgrades.

The Chry. Uni-Cam v2 system adds a reverse camera to the factory 8.4” or 5” touch screen. It is compatible with 2013+ Chrysler, Dodge and Jeep vehicles. Additionally, the user can force the rear camera to display on screen at any time, in any gear*. *OEM rear camera force not supported.

Jaguar F-Type Cam adds 1 or 2 cameras (front & rear) to the factory display. Forcing either camera to display is activated via wired inputs. 

The RGB-PCM3.1N interfaces 2 video inputs including a backup camera with dynamic guidelines to the factory touch screen radio in select Porsches equipped with the PCM3.1 radio. 

The PCM4-CAM Kit interfaces a backup camera input (with active parking lines) and 1 additional video input (front cam, etc) to the factory media screen in the 2017 Porsche vehicles equipped with PCM4.0, 2015+ Audi A3 and 2015+ Golf VII.

This modification is used for select radios that have no option of adding a video input (typically for reverse cam) with any available interface. This modification will add 1 video input and one rear camera input, selectable by CAN data (rev cam) or OEM button (video input). 

The 4” Uni-Cam 2 for Ford vehicles is a plug & play solution for adding an aftermarket rear camera (and front camera) into Ford vehicles equipped with the OEM 4” media screen.

NOTE: Verify 75 ohms accross pins 6 & 12 at the 4" screen connector before ordering! See image 2 for more details.

The BMW56-N kit interfaces 3 video inputs (including a backup camera port) to the factory media screen in select ’04-’10 BMWs.

The BMW09-N kit interfaces a rear camera video input (and 1 additional video input) to the factory media screen in select ‘09-‘13 BMWs.