MOST HUR 997 KIT-210

Great! glad we got it going.
BmarTECH # 09/17/2015 9:06 a.m.

Hi Buzz, I figured that was going to be the problem… You can also use the file to "tweak" the audio level, if you need to adjust it a bit. Change the "Ch0.Volume" parameter by about 2-3 at a time. Don't change any other settings. Thanks, Tony Y.
Tony Yankovsky # 09/17/2015 9:07 a.m.

Any chance someone at NAVTV is working on a pioneer NEX steering wheel remote capability?
sandy kwan # 01/08/2016 2:50 p.m.

Hello Sandy, Thank you for your inquiry. Unfortunately, Pioneer radios use a completely different system for their remote controls, and it is not compatible with our MOST-HUR interfaces… Thanks, Tony Y.
Tony Yankovsky # 01/20/2016 6:40 p.m.

Hi I have problem with VSS not working properly with Pioneer AVIC-F70DAB. Currently the cable is unplugged since it will overrule the speed data from gps. Not on map movements, but on logs and actual speed reading. The VSS signal gets "stuck" at some readings and jumps to next reading, so its not accurate at all and shows just 0kmh after 120kmh or so. The behaviour is constant. Looking at pioneer speed data incoming from vss cable looks like millions of pulses in really short time. Sounds too much for me? But the speed vss gives is accurate in some speed range. Car is 2006 Boxster 987. Is there anything that can be done? Is this compatibility issue with pioneer or can this be solved with most hur update (i have newest installed)?
Toni S # 02/15/2016 7:55 p.m.

Hi

I have problem with VSS not working properly with Pioneer AVIC-F70DAB. Currently the cable is unplugged since it will overrule the speed data from gps. Not on map movements, but on logs and actual speed reading.

The VSS signal gets "stuck" at some readings and jumps to next reading, so its not accurate at all and shows just 0kmh after 120kmh or so. The behaviour is constant. Looking at pioneer speed data incoming from vss cable looks like millions of pulses in really short time. Sounds too much for me? But the speed vss gives is accurate in some speed range.

Car is 2006 Boxster 987. Is there anything that can be done? Is this compatibility issue with pioneer or can this be solved with most hur update (i have newest installed)?

Toni S # 02/15/2016 7:55 p.m.